10-signs-you-need-to-replace-your-windows-asap
| | |

10 Signs You Need to Replace Your Windows ASAP

ByTimothy Dale

On average, windows will last between 15 to 30 years, though the exact life span depends on several factors, including the type of glass, the quality and material of the frame, the local weather, and whether the window is installed properly or not. Regardless of these factors, windows and window frames can break or begin to show signs of wear, indicating that you need to repair the windows or invest in an upgrade. However, before paying for costly repairs, read on to learn 10 signs you need to replace your windows instead. 1. Visible Damage One of the most obvious signs that you should consider replacing the windows is if there is visible damage. While you can pay for the windows to be repaired, it’s important to consider their current age. Newer windows might be worth the cost of the repair, but it’s typically more cost-effective to replace older windows that are visibly damaged. Visible damage can include broken glass, a broken window frame, or even a broken seal that causes fog or moisture to accumulate between the panes. Not only can this damage put the home at risk of wood rot and mold growth, but it also detracts from the appearance of the home, reducing its value and negatively impacting the curb appeal. 2. Difficult to Operate Windows are designed to function without a lot of effort. You should be able to lock, unlock, open, and close the windows with relative ease, but as windows age, the frame might start to swell, and the hardware can rust or become bent due to regular use. When this occurs, you can pay to have the window hardware replaced or even have the frame repaired, but the same issues might happen again in a few years. Instead, it might be better to replace the window entirely to ensure you have another 15 to 30 years before you need to worry about the windows again. Keep in mind that while you can replace just one window at a time, it’s often better to invest in replacing multiple windows at once for a lower overall cost. 3. Room Feels Drafty While windows are designed to allow fresh air into the home, this doesn’t mean you always want outside air flowing into your house. If you notice that the room is drafty or that air seems to be leaking through the windows when they’re closed, this is typically a sign that the seal around them is broken, bent, or otherwise deformed. Replacing the seal will fix this issue, so if your current budget is too tight for a full window replacement, this might be a short-term solution. However, as the window ages, other problems will begin to occur, so this could be a good time to replace the window entirely. 4. Frames Feel Soft Some windows have metal window frames, but there is also a wide variety of wooden window frames. After years of exposure to rain, sleet, hail, and snow, the wood frames could begin to rot or break down, causing them to feel soft or spongy to the touch. This is a clear indicator that you will need to replace the windows and frames before the moisture begins to seep into the home. Similarly, if your window frames are made of metal, look for signs of rusting, chipping, or even crumbling, which typically indicates that the window frame is gradually breaking down. If the frame is no longer able to hold the glass or to keep moisture outside, it puts the home at risk, so plan to replace the windows as soon as possible. 5. High Energy Bills Home energy bills can be affected by a wide variety of issues around the home, like low-efficiency appliances, poor insulation, aging heating and cooling systems, or faulty windows. Since the furnace works to keep the home warm in the winter, and the air conditioner is primarily responsible for keeping the home cool in the summer, any drafty areas of the home where heat can flow freely through the walls reduce its overall efficiency. Faulty windows with loose or damaged seals can contribute to rising energy bills by forcing the heating and cooling system to work harder just to maintain the set temperature indoors. If you suspect this is the case, you can have the window seals replaced, though depending on the age and condition of the windows, it might be better to invest in a full window replacement to resolve the issue for the foreseeable future. 6. Water Leaks Through the Windows Windows are made to keep rain, sleet, hail, snow, and other sources of moisture outside the home, so if you notice that water seems to be coming in through your windows, this is a sign that you need to replace your windows as soon as possible. A little bit of water won’t do a lot of damage, but continued exposure to water can rot the window frame, warp the windowsill, damage the drywall around the windows, cause high humidity in the room, and even damage the flooring under and around the windows, depending on the severity of the leak. If you are short on funds and need a short-term solution, you might be able to prevent the window from leaking by replacing the seal, though this isn’t a guaranteed fix, especially if the window frame is already damaged. It’s best to replace the

5-summer-habits-that-might-be-spiking-your-utility-bills-(and-what-to-do-instead)
| | |

5 Summer Habits That Might Be Spiking Your Utility Bills (and What to Do Instead)

ByTimothy Dale

Credit: Getty Images / StockSeller_ukr Summer weather is ideal for enjoying the pool, the yard, and the sun, but after being outside for a few hours, it can also be a great relief to step into an air-conditioned home. These hot temperatures often cause many homeowners to adopt certain habits that are more wasteful than helpful. In an attempt to escape the heat, keep the house cool, and maintain the lushness of the yard, it can be all too tempting to try things that actually increase utility bills, costing you more in the long run for minimal relief. Use this guide to discover what summer habits secretly spike utility bills and what to do instead. Scott Levene is the vice president of Levco, a fuel and HVAC solutions company. He is also a licensed HVAC professional with nearly 20 years of experience. Read on to discover the ways you might be increasing your monthly bills without even realizing. 1. Cooling Unused Areas of the House Air conditioners help to cool down the home, but when you aren’t actively using specific rooms, there is no need to keep the doors open to these areas of the home. Central air conditioning systems might still provide some cooling to these areas through the ductwork, but ultimately, the cooling capabilities will be more focused in the central areas of the home where the thermostat is typically located. Closing certain doors allows the temperature to drop more effectively in the areas you are actually using, while saving energy. This particular trick works incredibly well for window and standing air conditioners, since their output is already focused in a single area of the home. 2. Running Fans 24/7 Fans can help move cool air throughout the home and provide direct relief to individuals who are near the fan. However, fans do not actually cool down the house, and their continuous operation can even add heat to the house. “A common habit is leaving fans on in empty rooms. Fans cool people, not rooms, so leaving them on when no one’s around just adds to the electric bill without any benefits,” says Scott Levene, vice president of Levco and licensed HVAC professional. 3. Frequent Lawn Watering Watering the lawn frequently might keep the grass looking lush and the gardens blooming nicely, but it is also a huge use of water that will drastically increase the cost of your water bill throughout the summer. In some areas, watering the lawn and yard might even be against local regulations due to droughts and water conservation efforts. Instead, it’s best to consider possible alternatives that can avoid waste and help save on your water bill. 4. Running the Air Conditioner with the Windows or Doors Open Many homeowners know to turn off the air conditioner if they are opening a window or door. However, this same knowledge might not be as obvious to other people living in the home, like children or teenagers. Additionally, some adults might open the windows on cooler evenings to bring in fresh air, but then forget to turn the AC off, which increases energy waste and leads to higher energy bills. 5. Setting the Thermostat Temperature Too Low Unfortunately, just because you turn the thermostat temperature as low as possible, this does not increase the speed at which the home will be cooled, though this doesn’t stop many homeowners from trying year after year. “The most common habit we see is turning the thermostat down too low, thinking it will cool the house faster. Setting the thermostat to 65°F instead of 75°F doesn’t make it work any faster; it just makes the system run longer and work harder, which drives up utility bills,” explains Levene. How Do These Habits Burn Your Budget? Deciding to put a stop to these habits and making the switch to a more budget-friendly alternative will help keep more money in your wallet and reduce waste. “The examples listed might only cost a few extra bucks a day, but that adds up over time,” Levene says. “Additionally, the extra strain on the HVAC system causes faster wear and tear, which can shorten the lifespan of the equipment. Frequent repairs or premature replacement costs are a major expense.” Related 7 Budget-Friendly Alternatives to Beat the Heat The more unnecessary warm-weather habits you tend to do each year, the higher the cost of your energy bills and the larger your ecological footprint, which is reflected in water and energy waste. Instead, work toward adopting budget-friendly habits that can both keep you cool and reduce your spending this summer season. 1. Use a Programmable Thermostat When you have a regular thermostat, it’s your responsibility to change the temperature throughout the day and when you leave the home. “Set your thermostat to a reasonable temperature. We recommend 76°F to 78°F when you’re home and 78°F to 80°F when you’re away,” Levene says. With a programmable thermostat, you can simply set a specific schedule based on when you leave for work, when you typically go to sleep, and when you wake, so you can reduce energy waste without even thinking about it. 2. Set Up a Rain Barrel Constantly watering the lawn is a huge waste of water, and it can quickly add up on your water bill. Instead, use one or more rain barrels in the yard to catch and collect rain. The collected water

What Is That Burning Smell from the Furnace
| | | | |

What Is That Burning Smell from the Furnace? How to Prevent Unpleasant Odors

ByTimothy Dale

As temperatures start to drop, homeowners make the switch to heating to ensure the home remains comfortable. However, the warm air can often be accompanied by a burning smell that quickly permeates your space. However, there are ways to prevent this odor in the first place and other methods for handling unfamiliar odors, like a musty or electrical burning smell. Use this guide to discover how to prevent the furnace smell when you turn it on for the season, other mysterious furnace smells you might encounter, and when to call a professional. Why Does the Furnace Smell When You First Turn it On? In most cases, when a furnace smells after being turned on for the first time in the season, there’s no need to worry. The smell of burning dust should fade quickly. But, if the smell persists or you notice a different smell from the furnace, it could be due to a serious issue with the HVAC system. Consider these common reasons why the furnace may smell when you first turn it on. Burning dust smells are relatively common when first turning on the furnace for the season. This is typically due to a buildup of dust on the burners, heat exchanger, air ducts, and other heating unit components. Generally, this odor will fade quickly as the thin layer of dust is burned away. Musty odors coming from the furnace usually indicate that there is mold or mildew trapped inside the HVAC system. It may be in the heating unit, the ductwork, the furnace filter, or even the humidifier pad. Electrical burning smells are not normal and should be addressed as soon as possible. Sometimes the smell is due to a foreign object stuck in the ductwork or vents of the HVAC system, but on other occasions, this smell may be due to burned or frayed wiring, or can also be a result of the furnace overheating. Rotten egg scents produced by the furnace are a sign of a gas leak. Since natural gas is odorless, the gas companies add a sulfur-based chemical to give off the distinct odor of rotten eggs as a way of warning homeowners that there is gas in the vicinity. Gas is flammable, putting the home at risk of a fire or an explosion, and it’s also harmful if inhaled, so you should vacate the home immediately. Smoke smells can occur if the exhaust vent is blocked, forcing the combustion exhaust from the furnace to escape into the home. This smell may also be a result of flammable material inside the ductwork, near heating vents, or too close to the furnace. Animal odors are often due to pets. Pet hair and dander are taken into the ducts through the cold air return, where they will remain in the ducts. Every time the furnace turns on, it recirculates pet hair and smells, until you have your ducts professionally cleaned. It’s also not unheard of for a pest to enter the ductwork of the home, where droppings and hair will produce a foul odor when the furnace is turned on. Oil smells can indicate that the filter on the furnace is clogged. This is typically due to a problem with the filter, which can be easily resolved by an experienced DIYer or a professional HVAC tech. Sewage stenches are powerful and off-putting, but can also help identify when there is a problem with the home sewage system. If the furnace starts to smell like sewage when it is first turned on then there may be a broken wastewater line or an open sewer line nearby that will need to be located and repaired. Chemical smells from the furnace should not be ignored. This could indicate that the heat exchanger is broken or not operating properly, which may lead to the release of odorless, invisible carbon monoxide gas; a known risk of gas-based heating systems. How to Prevent the Furnace Smell When You Turn It On Burning Dust Smell While the burning dust smell that comes from the furnace when it is first turned on is relatively harmless, that doesn’t mean you need to just deal with it each year. Instead, you can have the furnace and evaporator coil cleaned by a professional before the cold season begins. DIYers with enough experience and confidence can clean the evaporator coil in a furnace on their own by turning off the furnace, removing the access panel, then gently cleaning the coil with a soft cloth or brush, while being careful to avoid damaging the fins. Wipe down the condensate pan and the surrounding areas, then replace the panel and turn the furnace back on. You should also take this opportunity to replace the air filter, where dust might be trapped from the previous season. If the burning dust smell persists, then it’s recommended to turn off the furnace and contact an HVAC professional to inspect and repair the HVAC system. Musty Odors Musty odors are typically produced by mold and mildew. In some cases, the mold or mildew is attached to dust or other debris, so it burns off relatively quickly, but if the musty odor doesn’t go away, then you should start by replacing or cleaning the air filters. Similarly, you can replace or wash the humidifier pad using a solution of water and vinegar to kill any mold or mildew. However, if the musty odor still