4-reasons-your-dishwasher-is-cloggedand-how-to-fix-it-fast
| | | | |

Reasons Your Dishwasher Is Clogged and How to Fix It Fast

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

A clogged dishwasher can result in slow-draining or standing water in the dishwasher tub, foul odors, and dishes that never seem to get fully clean. If these symptoms sound familiar, you likely have a clog, but before you can fix it, you need to locate the clog, which is often the most challenging part of the job. Learn where to look for dishwasher clogs, how to unclog a dishwasher yourself, and when you should call a professional to inspect your appliance and plumbing.

How to Clear Common Dishwasher Clogs

The appropriate method for unclogging a dishwasher depends on the type of clog you’re dealing with. This list outlines the most common sources of dishwasher clogs and provides instructions on how to clear each type.

Before attempting to unclog your dishwasher, disconnect or turn off the power supply to the appliance.

1. Drain Filter Clogs

Drain filter clogs are among the most common dishwasher clogs. Most dishwashers have multiple screens and filters with different-sized holes to capture food debris and grime, preventing it from being washed further downstream.

However, the dishwasher drain filters should be regularly removed and cleaned to ensure that dirty water can still drain efficiently from the appliance, as they’re prone to clogging.

To remove the filter, follow these steps:

  1. Remove the dishwasher rack.
  2. Remove any standing water.
  3. Lift out the upper screen.
  4. Lift out the filter.
  5. Clean both the filter and the upper screen.
  6. Check for any clogs or food debris inside the filter housing.
  7. Reinstall the filter, upper screen, and dishwasher rack.

2. Drain Hose Clogs

Occasionally, debris can make it past the dishwasher filter, potentially leading to a clogged dishwasher drain hose. This is even more likely to result in a clog if the drain hose is kinked, which is a common occurrence.

To check the hose, access it beneath your sink. However, you may need to disconnect the hose and pull the dishwasher out of position to fully assess the hose.

If the hose is kinked, redirect it so it flows freely. If you find a clog, disconnect the hose and flush it with hot water until the clog clears.

3. Spray Arm Clogs

Sometimes, the dishwasher clog can be inside the spray arms. If this is the case, your dishwasher still drains as usual, but you’ll likely notice dirt, debris, or a greasy film on your dishes after the wash cycle because the clogged spray arms aren’t washing and rinsing as intended, leaving the dishes dirty.

To clean the spray arms, follow these steps:

  1. Remove the spray arms. Most models unclip or twist out of their position.
  2. If possible, disassemble the spray arms. Some spray arms can be opened for better access for cleaning the inside.
  3. Use a toothpick to clean the small holes.
  4. Soak it in a warm water and vinegar solution to loosen up stubborn grime, then rinse until clean.
  5. Reassemble and reinstall the spray arm.

4. Garbage Disposal Clogs

If you have a garbage disposal, check to ensure it’s not full of food debris, as this can prevent the dishwasher from draining properly, leading you to believe that the dishwasher itself is clogged.

How to Clear Deep Clogs

If you believe the dishwasher drain is clogged beyond the filter, you can use a drain snake to gently clear the clog. Follow this with a vinegar and baking soda rinse to clear any stuck-on debris. Use 1/4-cup of baking soda, followed by 1/2 cup of vinegar, to produce a foamy reaction that helps loosen stubborn grime. Once it stops fizzing, rinse off the residue.

After clearing the clog, run a dishwasher cycle without any dishes or detergent to clean the interior and flush out the drain. Add a cup of vinegar to the dishwasher to freshen the interior and help clear out the drains.

When to Call a Professional

If you’ve checked all the common dishwasher clog locations to no avail and your dishwasher is still draining slowly, it may be time to have a professional take a look. Plumbers will be able to rule out any clogged plumbing beyond the dishwasher, while appliance technicians can ensure the dishwasher is working as intended.

Share this page

Similar Posts

  • | | | |

    6 Reasons Your Lights Are Flickering, Plus Easy Fixes

    Credit: Getty Images / Kateryna Kukota Lights flickering in your home might seem like a cause for concern, especially if you’re unfamiliar with how home electrical systems work. While flickering lights can stem from a major electrical problem, it is more likely that the issue is related to the bulb or switch. However, it is essential to identify the cause of the flickering lights so you can rule out any serious electrical issues. Learn the most common causes of flickering lights and how to fix them, as well as when it’s advisable to call an electrician. 6 Potential Causes of Flickering Lights Before calling an electrician, try troubleshooting these potential causes of flickering lights. 1. Bulb Issues One of the most common causes of flickering lights is an issue with the bulb. Fortunately, bulb issues are also the easiest fix. Solution: If you suspect the light bulb is burning out, you can easily test your theory by replacing the light bulb. If the new one doesn’t flicker, you’ve likely solved the problem. 2. Switch Issues Light switches see a lot of use. While premium switches may last a lifetime, budget light switches are likely to fail over time. In this case, you might notice the lights flicker when you touch the switch. Solution: If you suspect the light switch is causing the flickering lights, replacing the switch should solve the problem. To do so, turn off the electricity and the circuit breaker box, remove the switch plate, and uninstall the light switch. Wire and install the new light switch exactly like the old one, reinstall the switch plate, and restore the power. 3. Fixture Issues Less commonly, the light fixture itself may be to blame. If there are loose connections or corrosion in the fixture, the lights may flicker. Solution: You can attempt to repair the fixture by fixing the connections or removing corrosion, especially if it’s a premium fixture. However, it may be more beneficial to replace cheaper light fixtures. 4. Incompatible Bulb or Dimmer Switch If you’ve ever shopped for light bulbs, you may have noticed language on the box referring to dimmer compatibility. This is because some types of bulbs and dimmer switches don’t play well together. If you install a light bulb that’s incompatible with the light switch, it will likely flicker as a result. Solution: To ensure your light bulb is compatible with your switch, check the bulb’s specifications before purchasing a replacement. If you’re having trouble finding a light bulb that won’t flicker due to dimmer incompatibility, your best bet is to try a traditional incandescent light bulb. However, they may be difficult to find in some areas due to government restrictions on energy usage. Even LED light bulbs that specify dimmer compatibility can sometimes flicker when tied to a dimmer switch. 5. Wiring Issues Sometimes, the fixture, the bulb, and the switch may all be in good, working condition, but the wiring is to blame for the flickering lights. The wires could be worn or damaged, but it’s more likely that they are loose, causing an intermittent connection, which results in a flicker. Solution: With the power turned off, inspect the wiring and all relevant connections, including those at the switch, circuit breaker, and light fixture. 6. Electrical Load Issues If you notice the lights flickering whenever other appliances turn on, such as a vacuum, dishwasher, blow dryer, or other power-hungry products, it’s likely because you’re running them on the same circuit as the lights, causing an excessive electrical load on the circuit. Whenever these devices turn on, they draw a large amount of power, which causes the current running to the lights to fade, resulting in flickering. Solution: If the circuit is overloaded, move the high-power appliance to a different circuit. For something like a blow dryer or vacuum, unplug it and plug it into a different outlet. Install a dedicated circuit for large, permanently installed appliances, such as dishwashers. When It’s Time to Call a Professional Electrician If none of these solutions resolve your flickering lights or if the lights are accompanied by buzzing sounds, burning smells, heat around the fixture or outlets, or frequently tripping breakers, contact a professional electrician immediately. You should also consider professional help if multiple lights in your house are flickering and the issue isn’t isolated to a single fixture or circuit. If you haven’t already, a professional will likely instruct you to cut the power at the breaker until the problem can be remedied.

    Share this page
  • | |

    Eby fires back at Ford over suggestion B.C. would accept 2nd oil pipeline

    By Wolfgang Depner The Canadian Press Posted June 3, 2025 8:26 pm 1 min read 2:31 Are pipelines a realistic part of Carney’s ‘nation-building’ projects? Prime Minister Mark Carney says he wants to quickly approve “nation-building” resource projects in an effort to boost Canada’s economy. David Akin explains whether it’s realistic to see new pipelines built anytime soon, and the challenges in getting other big resource projects approved. B.C. Premier David Eby says he won’t be throwing his support behind a new oil pipeline through the province, dismissing Ontario Premier Doug Ford’s suggestion that Eby would change his mind. Eby says in response to Ford’s remarks on Monday that the publicly-owned TMX pipeline is already running through B.C., and the province doesn’t support lifting the ban on oil tankers off British Columbia’s northern coast. 1:58 Premiers talk possible new pipeline out west He says it’s not his job to tell Ford it’s “extremely unlikely” there will be a tunnel under Toronto’s Highway 401, or tell Alberta Premier Danielle Smith her “vision” for a pipeline connecting Alberta and northern B.C. is “many, many years off” with no proponent in sight. Story continues below advertisement Eby says his job instead is to protect the interests of British Columbia by bringing forward “shovel-ready” projects. 2:17 Danielle Smith’s pipeline push at premier’s meeting gets support from Carney Trending Now Ford had said heading into a meeting between premiers and Prime Minister Mark Carney that he was confident Eby and Carney would “work things out” regarding a second pipeline. Get daily National news Get the day’s top news, political, economic, and current affairs headlines, delivered to your inbox once a day. Eby was speaking Tuesday from Osaka, Japan, on a 10-day trade mission in Asia, and deputy premier Niki Sharma represented B.C. at the meeting of premiers in Saskatoon. &copy 2025 The Canadian Press Sponsored content

    Share this page
  • |

    Vancouver falls down the list of top cities in the world for 2025

    Vancouver is known around the world thanks to top attractions like the Honda Celebration of Light and award-winning dining spots. However, a new ranking has revealed the city is slipping a bit compared to its peers. The Oxford Economics Global Cities Index has released its report for 2025, which is a holistic ranking of the 1,000 cities included in its Global Cities Forecasting Service. Cities are scored across five categories to achieve a well-rounded comparison of locations. The five categories are Economics, Human Capital, Quality of Life, Environment, and Governance. Vancouver has made the list once again this year; however, it has slipped a few spots down the newest global ranking. Kenneth Chan/Daily Hive Vancouver came in 20th place last year, ranking 35th in economics, 33rd in human capital, 78th in quality of life, 149th in environment, and 52nd in governance. In 2025, Vancouver dropped 17 places to land in 37th place, with rankings dipping in three categories: 53rd in economics, 52nd in human capital, and 186th in quality of life. However, the city’s score jumped in two categories: it ranked 61st in environment and 27th in governance. “Arguably one of the most picturesque cities in the world, it is no surprise that Vancouver is such an attractive location for many Canadians and international migrants,” wrote Oxford Economics Global Cities Index in its report. “For those who can handle the steep housing costs, there are few other cities that can match Vancouver’s economic strength and human capital.” Charles HHuang/Shutterstock The Global Cities Index covers the 1,000 largest cities in the world, which are located in 163 different countries, including 103 cities in Canada. Toronto ranked as the highest city in Canada on the list at #20, with Montreal coming in at #43, and Ottawa-Gatineau at #88. Calgary landed in #50 and Edmonton settled even further down on the list, coming in at #131. You can check out the full ranking online. With files from Laine Mitchell

    Share this page
  • | | | | |

    What Is That Burning Smell from the Furnace? How to Prevent Unpleasant Odors

    As temperatures start to drop, homeowners make the switch to heating to ensure the home remains comfortable. However, the warm air can often be accompanied by a burning smell that quickly permeates your space. However, there are ways to prevent this odor in the first place and other methods for handling unfamiliar odors, like a musty or electrical burning smell. Use this guide to discover how to prevent the furnace smell when you turn it on for the season, other mysterious furnace smells you might encounter, and when to call a professional. Why Does the Furnace Smell When You First Turn it On? In most cases, when a furnace smells after being turned on for the first time in the season, there’s no need to worry. The smell of burning dust should fade quickly. But, if the smell persists or you notice a different smell from the furnace, it could be due to a serious issue with the HVAC system. Consider these common reasons why the furnace may smell when you first turn it on. Burning dust smells are relatively common when first turning on the furnace for the season. This is typically due to a buildup of dust on the burners, heat exchanger, air ducts, and other heating unit components. Generally, this odor will fade quickly as the thin layer of dust is burned away. Musty odors coming from the furnace usually indicate that there is mold or mildew trapped inside the HVAC system. It may be in the heating unit, the ductwork, the furnace filter, or even the humidifier pad. Electrical burning smells are not normal and should be addressed as soon as possible. Sometimes the smell is due to a foreign object stuck in the ductwork or vents of the HVAC system, but on other occasions, this smell may be due to burned or frayed wiring, or can also be a result of the furnace overheating. Rotten egg scents produced by the furnace are a sign of a gas leak. Since natural gas is odorless, the gas companies add a sulfur-based chemical to give off the distinct odor of rotten eggs as a way of warning homeowners that there is gas in the vicinity. Gas is flammable, putting the home at risk of a fire or an explosion, and it’s also harmful if inhaled, so you should vacate the home immediately. Smoke smells can occur if the exhaust vent is blocked, forcing the combustion exhaust from the furnace to escape into the home. This smell may also be a result of flammable material inside the ductwork, near heating vents, or too close to the furnace. Animal odors are often due to pets. Pet hair and dander are taken into the ducts through the cold air return, where they will remain in the ducts. Every time the furnace turns on, it recirculates pet hair and smells, until you have your ducts professionally cleaned. It’s also not unheard of for a pest to enter the ductwork of the home, where droppings and hair will produce a foul odor when the furnace is turned on. Oil smells can indicate that the filter on the furnace is clogged. This is typically due to a problem with the filter, which can be easily resolved by an experienced DIYer or a professional HVAC tech. Sewage stenches are powerful and off-putting, but can also help identify when there is a problem with the home sewage system. If the furnace starts to smell like sewage when it is first turned on then there may be a broken wastewater line or an open sewer line nearby that will need to be located and repaired. Chemical smells from the furnace should not be ignored. This could indicate that the heat exchanger is broken or not operating properly, which may lead to the release of odorless, invisible carbon monoxide gas; a known risk of gas-based heating systems. How to Prevent the Furnace Smell When You Turn It On Burning Dust Smell While the burning dust smell that comes from the furnace when it is first turned on is relatively harmless, that doesn’t mean you need to just deal with it each year. Instead, you can have the furnace and evaporator coil cleaned by a professional before the cold season begins. DIYers with enough experience and confidence can clean the evaporator coil in a furnace on their own by turning off the furnace, removing the access panel, then gently cleaning the coil with a soft cloth or brush, while being careful to avoid damaging the fins. Wipe down the condensate pan and the surrounding areas, then replace the panel and turn the furnace back on. You should also take this opportunity to replace the air filter, where dust might be trapped from the previous season. If the burning dust smell persists, then it’s recommended to turn off the furnace and contact an HVAC professional to inspect and repair the HVAC system. Musty Odors Musty odors are typically produced by mold and mildew. In some cases, the mold or mildew is attached to dust or other debris, so it burns off relatively quickly, but if the musty odor doesn’t go away, then you should start by replacing or cleaning the air filters. Similarly, you can replace or wash the humidifier pad using a solution of water and vinegar to kill any mold or mildew. However, if the musty odor still

    Share this page
  • | | | |

    This is how Canada’s new GST cuts on home sales up to $1.5 million for first-time buyers will work

    Prime Minister Mark Carney is fulfilling one of the key promises the Liberal party made during the recent federal election campaign, specifically relating to eliminating the federal five per cent Goods and Services Tax (GST) on home prices for first-time homebuyers. “My government has a mandate to bring down costs. We are delivering this mandate by cutting taxes — so Canadians keep more of their paycheques to spend where it matters most,” said the prime minister, with the specific plans for the GST cuts now released following King Charles III’s speech from the throne on Tuesday. This will be applied as a rebate — the First-Time Home Buyers’ GST Rebate. For first-time buyers only, there will be zero GST applied on new homes sold at up to $1 million. For new properties bought at a price of between $1 million and $1.5 million, there will be a reduced GST for first-time buyers and their new homes. This means that for homes priced at up to $1 million, first-time buyers will save up to $50,000 by not having to pay the GST. Buyers with new, more expensive homes will be eligible for a reduced GST rebate, which falls incrementally from home prices of $1 million to $1.5 million. For example, a home price of $1.1 million would be eligible for a 20 per cent rebate of $40,000, a home price of $1.25 million would be eligible for a rebate of $25,000, and a home price of $1.4 million would be eligible for a rebate of $10,000. A “new home” purchase is defined as property bought from a new home by a builder, a self-built home or a self-contracted new home, or an acquisition of shares of a co-operative housing corporation. Individuals are eligible for the rebate if they are adults and Canadian citizens or permanent residents. As well, they must not have lived in a home that they owned or that their spouse or common-law partner owned in the calendar year or in the four preceding calendar years. This existing ownership status consideration exists both within and outside Canada. At least one of the purchasers in a sale must be a first-time buyer for use as their primary residence, with this individual required to occupy the home following the sale. The sale agreement must be made between May 27, 2025 and Dec. 31, 2030. Homes that have yet to be built under the agreement must begin construction before 2021, with substantial completion by no later than the end of 2035. For rebates for owner-built homes, an eligible individual — at least one of the owner-builders who qualify as a first-time homebuyer — can recover up to $50,000 of the GST or the federal part of the rebate. Construction on the property must begin on or after May 27, 2025, with substantial completion by the end of 2036. And as for the rebate through the co-operative housing corporation share acquisition, an individual can similarly claim up to $50,000. The acquisition and construction timelines are the same for this option. This amounts to an adjustment, expansion, and refinement of Carney’s promise made during the election campaign to eliminate the GST on “new and substantially renovated” home sales up to $1 million for first-time buyers. Conservative party leader Pierre Poilievre vowed to axe the GST for new homes up to $1.3 million, accounting for the higher home prices in markets such as Metro Vancouver and Greater Toronto. Carney’s policy move is endorsed by the Canadian Home Builders’ Association (CHBA), which states that they have been advocating for such changes for a long while, and that these regulations have not changed since the introduction of GST in 1991. They say the federal government at the time originally committed to adjusting the GST New Housing Rebate thresholds every two years to reflect changes in housing prices and protect housing affordability over time. But these thresholds have not been changed for about 35 years now. Prior to this week’s policy details announcement, the federal government offered a smaller rebate amount of up to $6,300 or 36 per cent of the GST payment that would be required for a home that costs $350,000 or less. If the home costs more than $350,000, the rebate is gradually reduced, with the rebate reaching zero for a home price of $450,000 and over. “For years, CHBA has been advocating for a change to the GST thresholds on new construction homes to help address housing affordability challenges in regions across the country, and this measure is a very positive step forward for Canadians,” said Kevin Lee, CEO of CHBA, in a statement. “Previously, without details around the implementation of this measure, Canadians wishing to enter the housing market were holding out on buying a new construction home, which results in fewer home starts, so it is encouraging that today first-time buyers can have the confidence to move forward.” But Lee suggests the rebate thresholds should be more expansive to provide a greater number of homeowners with relief. CHBA wants to see the zero GST threshold increased to new home prices of $1.5 million, with the gradual reduction kicking in for prices between $1.5 million and $2 million, which would expand the eligibility for first-time homebuyers in Metro Vancouver and Greater Toronto, where there are higher home prices. They are also urging the federal government to expand the rebate to all new homes

    Share this page
  • | | |

    4 Updates to Invest in (Plus 4 to Skip) When Moving to a Home Short-Term

    Short-term moves can be stressful, and making a temporary space feel like home is important. But before you start knocking out walls and upgrading bathrooms, it’s wise to consider your return on investment—especially if you’re going to be reselling. “The decision to make improvements to a home intended for short-term use should be based on time, money, and immediate gratification,” says Dot Frank, a realtor with Better Homes and Gardens Real Estate Alliance Group. “Since your stay is limited, limit improvements to those you can tackle in short order. Personally, if more than 10% of my stay is spent renovating, it would be a no-go.” Read on for expert tips on the kinds of investments and upgrades to a temporary space that make sense in the long term.  Credit: Jay Wilde Smart Investments for Short-Term Upgrades If you’re having trouble deciding what to invest in for your temporary home, consider your budget and timeline first. “Some upgrades can be very cost effective and can be done quickly, while others can leave you gasping for air and asking yourself ‘are we there yet?” says Devin Juarez, a real estate agent with Better Homes and Gardens Real Estate Elite. “Analyzing your budget and how long the project will take will help you prioritize your projects.” Next, decide whether the project you’re considering is a want or a need. “A beautiful bathroom might be a great improvement and make your day great when unwinding at the end of a long day, but if your house needs a new roof due to leaks or a new front porch because you’re afraid you might fall through the floor with every step you take, then it might make more sense to put off the new bathroom,” Juarez says.  Finally, consider the return on investment. If you’re only living in a home for a short time, it doesn’t make sense to sink tons of cash into an upgrade unless you can make the money back when you go to sell.  “Some upgrades such as new windows, new front door, new heater, or even an upgraded water heater to provide more hot water might be aesthetically pleasing, provide more efficiency with utilities, or an added comfort, but their cost does not provide a large return when selling the property,” Juarez says. “There are other investments in your home that could provide a better return with the same investment.” Frank says the ideal investment is a cost-effective improvement you’ll be able to appreciate while you reside in the residence, that also boosts your resale value. “Remember the end game is to resell, so make sure to keep it neutral and appealing to prospective buyers,” she says. “Remember the end game is to resell, so make sure to keep it neutral and appealing to prospective buyers.” — Dot Frank Here are a few projects the experts say are often good investments. 1. Kitchen and Bathroom Remodels Kitchens and bathrooms that have been remodeled or updated almost always yield the highest return on investments. “Many buyers go straight to the kitchen when searching for a new home. And many home seekers are paying more attention to the details in the bathroom, as many want that spa-like feel when entering the bathroom,” Juarez says. “We gather around the kitchen when having reunions or unwinding at the end of the day or at the beginning of our days to get the morning boost. An updated kitchen and bathroom can make all the difference between selling your home or it receiving any attention at all.” As you make your updates, try to keep them neutral and pleasing for the widest range of buyers. “Avoid trends that are permanent. You don’t want a permanent trend like your kitchen cabinets. That’s permanent,” says Tammy Doss, an agent with Better Homes and Gardens Real Estate Central. Doss also cautions against making cheap upgrades like painting countertops, which won’t last long. Don’t have the time or budget for a major overhaul? Consider a small update. “Kitchens and bathrooms might be the heart of the home, but they can also feel daunting to renovate,” says Marjorie Adam, broker and owner at Better Homes and Gardens Real Estate Pathways. “The good news is that minor upgrades like swapping out cabinet hardware, replacing faucets, and updating light fixtures can be done on a budget and deliver impressive results. These changes elevate the look of the space without requiring a major remodel.” 2. Curb Appeal Updates Doss says curb appeal is one of the best ways to get eyes on your property when you go to sell. “I always tell my buyers, it’s like going on a dating app,” Doss says. “You swipe left or you swipe right. If you see a house that is cluttered with dirty dishes in the sink and it’s just a wreck, you’re going to swipe left. You’re not going to date that house.”  Doss says a well-manicured lawn and facade on your home will draw the most buyers and showings. “Once they’re in the door, they can decide if they want a second date or making an offer,” she says. “They want to see the lawn has been taken care of—no oversized shrub,” Doss says. “They want to make sure the gutters have been taken care of, the porch has been swept off.” If you want to go above and beyond, try adding to your beds. New buyers will be drawn to

    Share this page